随钻测量技术在矿业领域发展现状(4)
【作者】网站采编
【关键词】
【摘要】:[5] Atlas Copco Group. Atlas Copco Drilling Solutions[A].Workshop on Technology Development Mining Sciences,2004, 41: 573-612. [9] R. Teale. The concept of specic energy in rock drilling[J]. Interna[5] Atlas Copco Group. Atlas Copco Drilling Solutions[A].Workshop on Technology Development & Mechanisations of Mines,IHC, New Delhi ,2015.
[6] J.B. Segui, M. Higgins, Blast design using measurement while drilling parameters[C]. 2002,Fragblast 6, 287-299 .
[7] Scoble, M.J., J. Peck, and C. Hendricks. Correlation between rotary drill performance parameters and borehole geophysical logging[J]. Mining Science and Technology,1989,(8):301-312.
[8] Yue,Z.Q.,C.F.Lee,K.T.Law, et al. Automatic monitoring of rotary-percussive drilling for ground characterization - illustrated by a case example in Hong Kong[J].International Journal of Rock Mechanics & Mining Sciences,2004, 41: 573-612.
[9] R. Teale. The concept of specic energy in rock drilling[J]. International Journal of Rock Mechanics & Mining Sciences,1965, 2, 57-73.
[10] A.K. Jain, D.P. Singh. Specic energy as a criterion for drill-ability of rocks: a laboratory study[A]. In Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining: Proceedings of the Australian Conference on Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining, 1993:253-264.
[11] P. Dunn, C. Roberts, B. Ballardin, The use of specic energy as a criterion for drillability index[A]. In Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining: Proceedings of the Australian Conference on Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining, 1993:125-132.
[12] C. Mathis. Proposal of report on rock quality index based on rotary drill performance [C]. Unpublished report, University of Alberta, Calgary, 1975.
[13] Liu, H., and K. Karen Yin. Using information extracted from drill data to improve blasting design and fragmentation[J]. Fragblast,2001,5 (3): 157 - 179.
[14] M.J. Schoble, J. Peck, C. Hendericks. Correlation between rotary drill performance parameters and borehole geophysical logging[J].Min. Sci. Technol,1989(8): 301-312.
[15] Naganawa, S. Feasibility study on roller-cone bit wear detection from axial bit vibration[J]. Journal of Petroleum Science and Engineering, 2012(82):140-150.
[16] Cooper, G. A. A proposal for the real-time measurement of drill bit tooth wear[A]. Geothermal Resources Council 2002 Annual Meeting, 2002,Reno, Nevada.
[17] Vardhan, H., Adhikari, G. R., Govinda Raj, M. Estimating rock properties using sound levels produced during drilling[J]. International Journal of Rock Mechanics & Mining Sciences, 2009(46):604-612.
[18] H. Schunesson, Rock characterization using percussive drilling[J].Int. J. Rock Mech. Min. Sci,1998(35):711-725.
[19] N. Beattie, Monitoring-while-drilling for open-pit mining in a hard rock environment: an investigation of pattern recognition technique applied to rock identi cation[D]. Kingston:Thesis (Master, Mining Engineering) Queen’s University, 2009.
[20] D. Thompson. Drill monitoring development and utilization of the drill data[A]. In Proceedings of Minnblast 99 Surface Blasting Conference, Duluth, 1999, 185-196.
[21] RQD investigation based on drill performance parameter[J]. Tunn. Undergr. Space Technol,1996,11(3), 345-351.
文章来源:《采矿与安全工程学报》 网址: http://www.ckyaqgcxb.cn/qikandaodu/2021/0616/714.html
上一篇:王集磷矿数字化矿山研究
下一篇:采矿引发的地质灾害及综合治理研究